PP Funnel x 2" Pipe with 3" TC

NMS custom fabricated polypropylene funnel.  A 169mm x 279mm funnel fusion welded to 2" PP USP Class VI pipe with a 3" PP USP Class VI sanitary tri-clamp.

And the Winner of the 2012 Interphex iPad Giveaway Is...

Richard Martel of Bristol-Myers Squibb!  Congratulations Richard!  Please give us a call at 508-832-5400 so that NMS can personalize your new iPad and send it to your mailing address.  Thank you to everyone who participated in this raffle and for your continued patience through the multiple drawings.  Everyone at Non-Metallic Solutions, Inc. looks forward to seeing you again at Interphex 2013.

2L PP Hose Barb x Dip Tube Assembly

NMS custom fabricated dip tube assembly for a 2L polypropylene heavy duty bottle.  Two (2) custom machined 3mm hose barbs x pipe with bends acting as inlet/outlet, one (1) custom machined 6mm hose barb x pipe supporting ventilation, all welded on a USP Class VI polypropylene 2" end cap.  The 2L carboy was relieved of the screw cap and received an aseptically fusion welded 2" sanitary ferrule.

NMS Lot Traceability

NMS has the ability to permanently imbed a graphic that contains lot numbers for traceability on all plastic tanks, vessels, totes, powder bags and more. NMS provides the piece of mind that your customized plastic product can be traced to its original source ensuring that it is compliant with your processes.

500L PP Mobile Bag Tote

NMS custom fabricated 500 liter polypropylene mobile bag tote.  This unique tote has a slide gate and port access that securely interlocks with the bottom of the media bag.

Interphex 2012 is happening now!

Non-Metallic Solutions, Inc. is proud to be a part of this year's Interphex show at the Javits Center in NYC.  Please stop by our booth #3422 if you are planning on attending the show - you could win a New iPad!  If you would like free guest pass, click here.  We look forward to meeting you.  Enjoy the show!

55G/200L "Cone Master" PE Tank

NMS custom tank assembly with the following:

• 55G/200L polyethylene open top/cone bottom vessel, 22” in diameter x 44” tall with molded volume marker

• Two (2) HDPE push/pull handles

• Custom HDPE flared-leg stand providing 18” of clearance from the cone bottom to the base plate

• Bolt-on PP disc cover with welded hinge and handle

• Two (2) 1” FNPT welded half couplings & three (3) ¾" FNPT half couplings

If you have an application that requires customized plastic tanks to meet your process requirements, whether pharmaceutical, bio-pharma or pure water, please click here to send us an inquiry.  Thank you!

6' x 3' x 3' Polypropylene Soak Tank

NMS custom fabricated 6' x 3' x 3' polypropylene soak tank.  Sloped bottom (corner to corner) with a 1.5" sanitary ferrule providing complete drainage.  A four-panel lid system allows for user access as needed & push/pull handles incorporated into the top girth.

Customized Access for Level Sensor

NMS Pure Solutions 250G HDPE tank.  A 1.5"sanitary TC was welded on the dished bottom of the tank & an access hole was drilled thru pedestal, welded & reinforced to give the end-user full access without compromising the integrity or strength of the pedestal.

250 Gallon NMS Pure Solutions - HDPE

NMS Pure Solutions holding tanks.  Each 250 gallon HDPE tank is 34" in diameter x 81" in height.  Installed & fusion/triple welded 1½" half coupling in bottom center for drainage.  Each tank comes equipped with 6" screw cap including silicone gasket, volume marker, molded HDPE 4-leg pedestal with full, 4-way access to the bottom fitting on 11" elevation.