50L PP Bag Transport Tote

NMS custom fabricated 50 liter bladder bag transport tote.  ½" natural polypropylene constructed box on ¾" base with supporting gussets.  Push/pull handle on top with four (4) 3" stainless steel, pharma-grade, all-swivel casters, two with tech-lock brakes.  This particular tote is in it's 2nd generation, built for Leading Innovating Products & Solutions, Inc. (LPS).

Re-work to customer's existing 50L Carboy

Below are photo's of a customer's 50L carboy that NMS repaired along with adding new features.

NMS replaced the damaged 1½" TC (outlet) located at the bottom of the carboy.

NMS removed the threaded neck, replacing it with a fusion welded 3" USP PP sanitary fitting. A 3" USP PP end cap was given a 1½" TC x pipe & a ¾" TC x pipe, both angled to promote vortex, ending at the 10L mark in the carboy. One (1) 3/8" hose barb installed as a vent.

3" EPDM USP sanitary gasket & 3" nylon bio-clamp included but not shown.

1 & 2 Liter USP Class VI Dip Tube Assemblies

NMS custom machined & fabricated dip tube assemblies on 2" sanitary end caps. Two styles, one for each size polypropylene bottle:

• ¾" TC's x 10mm pipe with bends, 6mm hose barb with bend & 3mm hose barb with bend
•   6mm hose barbs with bends & 3mm hose barb

If you have an application that calls for a unique, customized dip tube assembly for bio-pharmaceutical processes, please feel free to contact Non-Metallic Solutions, Inc. any time to receive over 40 years of the highest quality plastics knowledge & expertise at sales@nonmetallicsolutions.com.

PVDF Dip Tubes & Spray Ball Lances

NMS custom fabricates dip tubes in USP Class VI PVDF (polyvinylidene flouride) & polypropylene to meet your process requirements.  Please contact us at sales@nonmetallicsolutions.com to inquire about your design ideas & our dip tube selection - ¾" mini TC x any length tube (up to 8 feet in length) with a 1½" sanitary collar. Sizes range from ½" to 4" diameter & up to 20' long.

Polypropylene Soak Tanks

NMS custom fabricated sodium hydroxide soak tank. Double sloped bottom without partition, complete drainage using 1½" sanitary fitting on each end.  24" long x 18" wide x 16" tall on 3" polyurethane pharma-grade stainless steel casters.

36" long x 18" wide x 18" tall with center partition.