Custom Fabricated PE Tank

Pictured above is one of two custom fabricated polyethylene tanks NMS built for a customer.  This particular unit is considered a "right hand" tank, made from ¼" HDPE, with an outside dimension of 24" x 18" x 18" complete with one (1) ¾" threaded coupling & three (3) ½" threaded couplings.

Birth of NMS Pure Solutions!

Stainless steel cavity mold.

100 gallon & 250 gallon HDPE sample vessels.

250 gallon HDPE sample vessel.

Standard threaded neck section of the 100 gallon HDPE vessel.

Also available with a 6" TC inspection port with polysulfone cap.

NMS is excited to show you these first pictures of our new Pure Solutions line of vessels, available in 4 standard sizes - 100, 150, 200 & 250 gallon and in 3 standard resins - LPE, LPE+ (USP Class VI) & PP (USP Class VI). 

Troughs...

NMS has custom fabricated thousands of these polypropylene single-use troughs.  If there is an existing plastic product that you would like to have modified to better adapt to your bio-pharma processes, please contact us at sales@nonmetallicsolutions.com.

110L PP Removable Vessel

NMS fabricated polypropylene 110L cone bottom cylindrical product contact vessel.  The tank section is completely removable from the four legged stand for autoclaving purposes.  A 2" crevice free outlet fitting is located at the bottom of the vessel.

110L PP USP Cone Bottom Tank

NMS custom fabricated 110L polypropylene USP Class VI "product contact" vessel, equipped with:
- two (2) 0.75" welded sanitary connections installed in 0.50" polypropylene lid
- one (1) 0.375" o-ring style EPDM USP Class VI compliant gasket
- one (1) 2" welded sanitary connection installed in center of cone bottom
- one (1) polypropylene diaphragm valve with EPDM seals
- one (1) push/pull handle
- stainless steel hardware

Custom Fabricated Blocks

NMS customer requested a large quantity of blocks made out of refrigerator white polypropylene.  Blocks measure 18" x 2" x 1" and 13.875" x 2" x 1".  Each block is made to precise measurements, no CNC equipment needed.

9 Dip Tubes

More NMS customized dip tubes as requested by the end user - polypropylene USP Class VI compliant ¾" TC by 45" tube with welded 1½" sanitary mounting ring.