Double Sloped PP Tank

NMS fabricated this sodium hydroxide soak tank for Leading Innovative Products & Solutions, Inc. (LPS).  The tank measures 48" long x 20" wide x 20" tall (not including added height from 4" polyurethane pharma-grade all-swivel casters).  The tank is divided into two separate sloped compartments for complete drainage through 1" sanitary fittings.

60L PE Cylindrical Cone Bottom Vessel with Removable Filter Cartridges

NMS received a request from LPS to custom fabricate a 60L polyethylene cylindrical cone bottom vessel.  The end user wanted a tool-less system to attach & remove filter cartridges.  The above photos show the finished product; the video below shows how our clamping design operates.

PP Test Station

Pictured above, a polypropylene Test Station NMS fabricated for a customer.  This unit was a remake of an original piece the customer already owned.  Dimensions are 8 inches long, 14 inches wide, 4 inches high, made out of 1/2" polypropylene sheet.

Cutting PP Pipe

Making angled pipe cuts on the table saw always keeps you on your toes, sometimes the cutoff rocks back into the spinning saw blade...watch out!

Conceptual Drawing > Custom Fabricated Product

NMS received the top drawing via facsimile from LPS and was asked to fabricate a polypropylene rinse bin based on that drawing.  This sketch is not typical of original concept drawings NMS receives, but shows how an idea can transform into actual product.  The bottom three pictures are of the finished rinse bin.

60L & 100L Polyethylene Bag Retainers

Pictured above are six 60L & two 100L standard bag retainers NMS fabricates for Advanced Scientifics.

NMS Pure Solution Demo Video

Thank you 2010 ISPE Boston & Attendees!

Non Metallic Solutions, Inc. would like to take the opportunity to thank everyone that attended yesterday's 2010 ISPE Boston Product Show at Gillette Stadium.  Thank you to the ISPE Boston Area Chapter for hosting & putting on one of the best bio-pharmaceutical exhibitions in the world.  A thank you is also deserved for Sam Fischer of LPS, who's dedication & commitment to NMS is 2nd to none!  NMS received a lot of positive & encouraging feedback in regards to our custom plastic fabrication & we were thrilled to launch our newest product into the bio-pharma market, NMS Pure Solutions.  For those of you who were not able to attend, below is the flyer distributed throughout the show. NMS is anxious & excited for the 1st NMS Pure Solution rotationally molded tank to be released early November.  Please, stay tuned!

ISPE 19th Annual Product Show

Please visit Non-Metallic Solutions, Inc. at booth #241 this Wednesday, October 6th at Gillette Stadium for the ISPE Boston Chapter's 19th Annual Product Show.  Doors open at noon and the show runs until 8pm.