10 Gallon HDPE Removable Tank

NMS custom fabricated 10 gallon removable HDPE tank.  1½" welded sanitary ferrule installed in cone bottom center, 7” diameter opening for stirrer, 3” welded sanitary ferrule installed in cover & 3” end cap with three (3) mini TC x 10mm pipe bent 90º above cover & 135° below cover.

Powder Funnel System

NMS custom fabricated powder funnel filling/holding station.  Three tiered system with removable dust covers.

1000L Mobile Bag Tote

NMS custom fabricated 1000L polypropylene bag tote. 3 girths for added strength, 5 swivel (2 locking) stainless steel, bio-pharma grade 6" polyurethane casters mounted to the underside of a sloped bottom for complete drainage.

Front of tote with removable access door

Interior of tote with view of bag hose port

Underside of tote has 2" x 2" push/pull bar on each end for electronic tote mover

Bag hose key for bottom port

80G HDPE Tank with 3/4" PP Dolly

NMS custom fabricated integrated tank & dolly system.  Dolly is  ¾" natural polypropylene with four 10" locating posts & five stainless steel, pharma grade, all swivel casters spaced according to scale requirement.  HDPE tank received four vertical custom handles paired 180° apart.

PP Drip Tray with Pump Mount

NMS custom fabricated polypropylene 20" x 30" drip tray made from ¼" natural sheet stock, includes a 4" elevated island for a pump mount and a ¾" TC fitting for drainage.

2011 Stanley Cup Champions - Boston Bruins!!!

Congratulations to the Boston Bruins for winning their 6th Lord Stanley's Cup!  The city of Boston & New England win again!

PP Caps with Accessories

6" polypropylene screw cap with 3/8" hose barb and 3/4" TC x pipe with 45° bend.

3" sanitary polypropylene end cap with 3/8" hose barb and 3/4" TC x pipe with 45° bend.

50L PP Stackable Totes

NMS custom fabricated ½" polypropylene 50 liter stackable bag totes for a client.  Each tote stacks on top of the other, with viewing windows, bag holding tabs and handles.

350L PP Bag Tote - Revised

A couple of weeks ago, we posted this photo of a NMS prototype polypropylene bag tote per the customer's conceptual drawing:

After the customer received the tote & had the opportunity to use it in the required setting, some changes needed to be made along with the addition of extra options.  Below are photos of the completed tote, built to changes in the order:

Redesigned base and leg configuration

3 bag viewing windows made out of polycarbonate were added

Handles on every side were added for pushing/pulling along with a keyed access port for bag adjustments

Close up shot of the keyed access port

200L Mobile Mixers

NMS custom fabricated 200 liter rectangular mobile mixer, 26" x 26" x 25" tall with an overall height of 40".